BETZ LABORATORIES INC -- HYDROCHLORIC ACID 2%, 250 -- 6810-01-091-6216
===================== Product Identification ===================== Product ID:HYDROCHLORIC ACID 2%, 250 MSDS Date:02/16/1991 FSC:6810 NIIN:01-091-6216 === Responsible Party === Company Name:BETZ LABORATORIES INC Address:4636 SOMERTON RD City:TREVOSE State:PA ZIP:19053 Country:US Info Phone Num:800-877-1940 Emergency Phone Num:800-877-1940 CAGE:24774 === Contractor Identification === Company Name:BETZDEARBORN INC. Address:4636 SOMERTON ROAD Box:City:TREVOSE State:PA ZIP:19053 Country:US Phone:215-355-3300 CAGE:24774 ============= Composition/Information on Ingredients ============= Ingred Name:NON HAZARDOUS INGREDIENTS ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: SLIGHTLY IRRITATING TO THE SKIN. MODERATELY IRRITATING TO THE EYES. VAPORS, GASES, MISTS AND/OR AEROSOLS MAY CAUSE IRRITATION TO UPPER RESPIRATORY TRACT. CHRONIC: PROLONGED OR REPEATED CONTACT MAY CAUSE PRIMARY IRRITANT DERMATITIS. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:INHALATION MAY CAUSE IRRITATION OF RESPIRATORY TRACT; SKIN CONTACT MAY CAUSE ITCHING AND/OR REDNESS. Medical Cond Aggravated by Exposure:NONE KNOWN ======================= First Aid Measures ======================= First Aid:SKIN: REMOVE CONTAMD CLTHG. WASH EXPOSED AREA W/LG QTYS OF SOAP SOLN OR WATER FOR AT LST 15 MIN. EYE: IMMED FLUSH W/WATER FOR AT LST 15 MIN. IMMED CONT MD FOR ADDITIONAL TREATMENT. INHAL: REMOVE FROM CONTAMD AREA TO FRESH AIR. APPLY APPROPFIRST AID TREATMENT AS NECESSARY. INGEST: GEN - DO NOT INDUCE VOMIT. IMMED CONT MD. DILUTE CONTENTS OF STOMACH USING 3-4 GLASSES MILK OR WATER. ===================== Fire Fighting Measures ===================== Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM OR WATER. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER. ================== Accidental Release Measures ================== Spill Release Procedures:GEN:VENT AREA, USE SPECIFIED PROT EQUIP.CONTAIN & ABSORB ON ABSORB MATL.PLACE IN WASTE DISP CNTNR.WASTE CHARACT OF ABSORBED MATL/ANY CONTAMD SOIL, SHLD BE DETERMD I/A/W RCRA REGS.SPECIFIC:FLUSH AREA W /WATER.WET AREA MAY BE SLIPPERY. SPREADSAND/GRIT. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT FREEZE. IF FROZEN, THAW AND MIX COMPLETELY PRIOR TO USE. ACIDIC. DO NOT MIX WITH ALKALINE MATERIAL. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF VENTILATION IS INADEQUATE OR SIGNIFICANT REAGENT EXPOSURE IS LIKELY, USE NIOSH/MSHA APPROVED RESPIRATOR WITH ACID GASES CARTRIDGES AND DUST/MIST PREFILTERS. Ventilation:ADEQUATE VENTILATION. Protective Gloves:RUBBER GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:WAST OFF AFTER EACH USE. REPLACE RUBBER GLOVES AS NECESSARY. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Spec Gravity:1 pH:AS IS Solubility in Water:100% Appearance and Odor:COLORLESS; PUNGENT ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE SPECIFIED BY MANUFACTURER. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:(DESTRUCTIVE FIRES) YIELDS ELEMENTAL OXIDES. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF I/A/W FED, STATE AND LOCAL REGULATIONS . GEN: WATER CONTAMD W/REAGENT MAY BE SENT TO A SANITARY SEWER, I/A/W ANY LOCAL AGREEMENT, A TREATMENT FACILITY/DISCHARGED UNDER A NPDES PERMIT. REAGENT (AS IS): INCIN/BURY IN APPROVED LANDFILL. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.