VALSPAR CORP -- LATEX CEILING WHITE, 10 926  -- 8010-00N047430
<pre>=====================  Product Identification  =====================

Product ID:LATEX CEILING WHITE, 10 926
MSDS Date:08/20/1990
FSC:8010
NIIN:00N047430
=== Responsible Party ===
Company Name:VALSPAR CORP
Address:1101 THIRD STREET SOUTH
City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Info Phone Num:612-332-7371
Emergency Phone Num:800-228-5635
CAGE:13374
=== Contractor Identification ===
Company Name:VALSPAR CORP
Address:1101 THIRD ST S
City:MINNEAPOLIS
State:MN
ZIP:55414
Country:US
Phone:800-228-5635
CAGE:13374
Company Name:VALSPAR CORPORATION
Address:1101 THIRD ST. SOUTH
Box:City:MINNEAPOLIS
State:MN
ZIP:55415
Country:US
Phone:612-332-7371/888-345-5732
CAGE:23526

=============  Composition/Information on Ingredients  =============

Ingred Name:CLAY; (SILICIC ACID, ALUMINUM SALT (1:2))
CAS:22708-90-3
Fraction by Wt: 25%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:DIATOMACEOUS EARTH, FLUX CALCINED; (KIESELGUHR, SODA ASH
    FLUX-CALCINED)
CAS:68855-54-9
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5%
OSHA PEL:10 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:ACETIC ACID VINYL ESTER; (VINYL ACETATE)  (SARA III)
CAS:108-05-4
RTECS #:AK0875000
Fraction by Wt: <1%
OSHA PEL:10 PPM; 15 STEL
ACGIH TLV:10 PPM; 15 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 55%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:VINYL ACRYLIC COPOLYMER
Fraction by Wt: 5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE KNOWN. CHRONIC: POSSIBLE
    CANCER HAZARD. CONTAINS INGREDIENTS WHICH MAY CAUSE CANCER BASED ON
    ANIMAL DATA. RISK OF CANCER DEPENDS UPON DURATION AND LEVEL OF
    EXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMED W/PLENTY WATER FOR @ LEAST 15 MIN & GET MED
    ATTN. SKIN:WASH THORO W/SOAP & WATER. REMOVE CONTAMD CLTHG & SHOES.
    WASH CLTHG BEFORE REUSE. DESTROY CONTAMD SHOES. INHAL: REMOVE TO
    FRESH  AIR. IF NOT BRTHG GIVE ARTF RESP. IF BRTHG DFCLT GIVE
    OXYGEN. GET MED ATTN IMMED. INGEST: INDUCE VOMIT IMMED AS DIRECTED
    BY MED PERS. NEVER GIVE ANYTHING BY MOUTH TO UNCON PERSON. POISON!
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:205F,96C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM AND/OR WATER
    FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
    COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. REMOVE SPILLS WITH INERT
    ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
    USE. DO NOT STORE ABOVE 120F. KEEP FROM FREEZING.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN PRODUCT RESIDUE. DO NOT
    CUT, PUNCTURE OR WELD CONTAINERS. ALL LABEL WARNINGS MUST BE
    OBSERVED UNTIL CONTAINER HAS BEEN CLEANED, RECONDITIONED OR
    PROPERLY DISPOSED OF.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED, NIOSH/MSHA
    APPROVED RESPIRATOR DURING & AFTER APPLICATION UNLESS AIR
    MONITORING VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
    RESPIRATOR MANUFACTURERS DIRECT IONS FOR RESPIRATOR USE.
Ventilation:REQUIRED WHEN SPRAYING OR APPLYING IN CONFINED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:GET MED ATTN IMMED. IF SWALLOWED, DO NOT INDUCE
    VOMITING. GIVE LARGE QUANTITIES OF WATER. IF AVAIL, GIVE SEVERAL
    GLASSES OF MILK. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS
    PERSON.  GET MED ATTN IMMED.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:24 @ 77F
Vapor Density:0.6
Spec Gravity:1.32
Evaporation Rate &amp; Reference:0.4 (BUTYL ACETATE =1)
Solubility in Water:YES
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:72.62

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID WATER-REACTIVE MATERIALS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE, HALIDES, CARBON
    DIOXIDE, CARBON MONOXIDE, METAL OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA IN A MANNER
    THAT COMPLIES WITH LOCAL, STATE & FEDERAL REGULATIONS. DO NOT
    INCINERATE CLOSED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.